|
臥式氣液兩相分離器在線計算程序，基于Souders Brown公式，對有除霧器或沒有除霧器的臥式氣液分離器，進行尺寸設計和計算，K值可通過GPSA方法、液滴尺寸方法和用戶輸入來獲得。This program does the design sizing and calculation for a horizontal gas liquid separator with or without Mesh Pad based on Souders Brown Equation. K Values can be estimated based on GPSA method, Droplet Size and on user input.
數據輸入(Data Input)氣體(Vapor)
質量流量(Mass Flowrate)
Kg/h
密度(Density)
Kg/m
液體(Liquid)
質量流量(Mass Flowrate)
Kg/h
密度(Density)
Kg/m
低液位(Low Liquid Level)
mm
時間(Time)
停留時間(Holdup Time)
min
緩沖時間(Surge Time)
min
K值(K Value)
選擇(Select)
除霧器(Mesh Pad)
K值(K-Value)
m/s
出口速度(Terminal Velocity):Vt
m/s
設計速度(Design Velocity)
% of Vt
管嘴(Nozzle Sizing)
進料ρV(Feed In, ρV)
Kg/m.s
出口氣體ρV(Vapor Out, ρV)
Kg/m.s
出口液體VMax(Liquid Out, VMax)
m/s
L/D比(L/D Ratio)
所需L/D(L/D Required)
解決方案Solution
單位Unit
基本配置 直徑Diameter (ID)1100mm 長度Length (L)3300mm Hv300mm HHLL to HNLL325mm HNLL to HLLL325mm HLLL150mm 管嘴配置 物料進口(Feed Inlet)200mm 氣體出口(Vapor Outlet)200mm 液體出口(Liquid Outlet)40mm 最小水平長度(Minimum Horizontal Length) V-L分離所需(for V-L Separation)423mm 停留和緩沖所需(Holdup & Surge)1872mm |
|關于我們|網站地圖|手機版|無圖版|油氣儲運網
(魯ICP備11007657號-3)
GMT+8, 2023-2-1 12:52 , Processed in 0.062081 second(s), 8 queries , Gzip On, Apc On.
Powered by Discuz! X3.4
© 2001-2018 Comsenz Inc.
